Licensed electricianFamily-owned in Greeneville, TNSame-day service when available

Outlets & switches · Greeneville, TN

Outlet, Switch & GFCI Installation and Repair

Not every electrical job is a new panel. Sometimes you just need an outlet where there is not one, a switch that works, or a GFCI that protects the kitchen. GPM Electrical handles outlet installation in Greeneville, TN, from a single replacement to a new 240-volt circuit, and we are glad to take small jobs.

  • New & relocated outlets
  • GFCI protection
  • 240-volt outlets
  • Broken or burnt outlet repair

When Nick Foster says ‘give me all the calls,’ he means it. If you have been told your job is too small to bother with, call us.

Adding outlets where you need them

Older homes often have too few outlets, which is why so many rooms run on power strips and extension cords. Adding an outlet means finding a safe path for the wire and a circuit with room for it. We can add outlets along a wall, extend a circuit into a new space, and move outlets that are in the wrong spot. We also work out whether the circuit you are tapping has the capacity for what you will plug in.

Replacing broken or burnt outlets

A cracked, loose, or discolored outlet is a warning. A plug that falls out, a faceplate that feels warm, or a brown mark on the plastic points to a worn or loose connection. We replace damaged outlets and switches and check the wiring behind them. On one call, we fixed two broken kitchen outlets the same day. If an outlet dies and a breaker has not tripped, see our electrical repair page.

Detached garage workshop with the lights on at dusk

GFCI protection for kitchens, baths and outdoors

A GFCI outlet shuts off power in a fraction of a second if electricity leaks, such as through water or a person. They protect you in places where water and power meet: kitchens, bathrooms, garages, basements, laundry areas and outdoor outlets. Older homes often lack them. We install GFCI outlets and GFCI breakers, and we test them with you so you know how the reset button works. We have also installed outdoor outlets and breakers for a septic ground line, where weather-rated parts and protection mattered.

240-volt outlets for dryers, welders and shop tools

Some equipment needs more than a standard outlet. Electric dryers, ranges, welders, air compressors and some shop tools use 240-volt circuits, with a dedicated breaker, heavier wire and a matching outlet. Each of these has its own plug type and wire requirement, so tell us the make and model, or send a photo of the nameplate. Getting the match right keeps the tool safe and the breaker from nuisance tripping. If you are planning a shop, see our garage and shop wiring page.

Switches, dimmers and other small jobs

  • Replace a switch that sticks, buzzes, or feels warm.
  • Install dimmers that match your bulbs.
  • Add a three-way switch so a light works from two places.
  • Swap old two-prong outlets for grounded ones where the wiring allows it.
  • Install USB outlets, tamper-resistant outlets, or outdoor weatherproof covers.

If you want a light fixture or a ceiling fan installed too, see our lighting and ceiling fan installation page.

Small jobs are welcome

A search for an electrician near me for small jobs usually ends with a no. We take them. One outlet, one switch, or a short list of odd jobs is fine. We will give you a price before we start. There is a service-call fee when a visit is needed, and we explain how it works when you call. We accept cash, check, and Cash App.

Why homeowners call GPM

  • Licensed electrician
  • Family-owned in Greeneville
  • Price before any work begins
  • Permits pulled when required
  • Rated 5.0 on Google

Talk to Nick directly

(423) 620-2283

Same-day service when the schedule allows. You get the price before any work begins.

How it works

From First Call to Finished Job

  1. 01

    Call or send a request

    Tell Nick what’s going on. Photos help if you have them.

  2. 02

    Get your price

    Many jobs can be priced over the phone. Larger ones may need a quick visit first.

  3. 03

    Permit if needed

    If the job requires an electrical permit and inspection, Nick handles the permit.

  4. 04

    Work done right

    We do the work, explain what we found, and clean up after ourselves.

Questions

Outlet and switch questions

Straight answers about pricing and how we work. Don’t see your question? Call Nick.

Why does my outlet have a test and reset button?

That is a GFCI outlet. It protects against shock. Press test to confirm it cuts power, then reset to restore it. If it will not reset, it may be faulty or protecting a problem downstream.

Can you replace a two-prong outlet with a three-prong?

Only if the wiring allows it. Without a ground wire, a GFCI outlet can be a safe option. We look at the circuit and tell you what is allowed.

Do outlets need a permit?

Replacing an outlet usually does not. New circuits can, and rules vary by city and county. We tell you what applies.

My outlets are warm. Is that normal?

A little warmth under a heavy load can be normal, but a hot outlet, a burning smell, or discoloration is not. Turn off the circuit and call us.

Can you install an outlet for my dryer or welder?

Yes. Tell us the model, and we will match the circuit and receptacle to it.

Request an estimate

Get a Price on Outlet or Switch Work

One outlet or ten, we will help. Call and tell us what you need.

  • Estimates over the phone where possible
  • Upfront pricing before work begins
  • Cash, check or Cash App accepted

Request an Estimate

Tell us about the job and Nick will get back to you.

Prefer to talk? Call (423) 620-2283